Silver Brazing, Brazing and Soldering |
|
 |
Stanley 10High Strength Self Fluxing 5% Silver Torch Alloy for Copper to Copper
 |
|
Overview |
|
Specifications |
|
Email to a Friend |
|
|
|
Overview |
|
Specifications |
|
Email to a Friend |
|
- Fabricate and repair copper air conditioning components, refrigeration components, radiators, heat exchangers, and other devices made from copper sheet and fittings.
- Join copper bus bards, electrical conduit, cable, and fabricated copper vessels.
- Join copper without flux in applications where flux is detrimental.
High strength, self-fluxing torch alloy for copper to copper; and copper to brass with flux.
Designed to produce smooth thin fillets in clean copper-to-copper joints without flux.
Provides excellent corrosion resistance and will withstand severe vibrations.
Use with flux for joining copper to brass or bronze.
Not recommended for steel or nickel alloys.
Welding Techniques: Clean joint area well. When joining copper to copper use without flux. Use a large size tip, carburizing flame and heat area broadly. Keep flame 2" to 3" from base metal and keep torch in constant motion.
When joining brass or bronze to copper or brass to bronze, use 20 flux. Paint paste along joint line and heat broadly until flux first dries and then melts. Feed rod into the joint, keeping torch in contant motion. When a continuous fillet is observed, remove flame and allow molten metal to solidify. Flux residue should be removed by washing in warm water. |
|
Overview |
|
Specifications |
|
Email to a Friend |
|
|
|
|
|
